StarBlaze 32I01 Class A Di-Electric Floor Coating
Two-part, solvent-free, self-levelling insulation coating for concrete and metal surfaces. Delivers high dielectric strength and long-term protection in electrical and industrial installations.
- Available Packs: 1.5 kg, 6 kg, 24 kg systems
- Mixing Ratio by Weight: 2:1
- Pot Life: 35–45 min @ 25 °C
- Curing: Touch Dry: 2 hrs | Hard Dry: 24 hrs | Full Cure: 72 hrs
- Shelf Life: 12 months (sealed, stored <25 °C)
- High BDV (>30 kV) for reliable insulation
Self-levelling, smooth finish
Moisture, chemical, and abrasion resistance
Light grey colour improves visibility and inspection
Solvent-free, low VOC system
Complies with IS 2584 and IEC 60243 Class A
Suitable for concrete and metal floors - Chemical and abrasion-resistant
- Superior aesthetics with high build-up thickness
- Certified as per IS 2584 and IEC 60243
High Voltage Substations
Power Distribution Infrastructure
Battery Rooms & Control Panels
Electrical Insulator Yards
FRP Barriers for Rail Infrastructure
Transformer and Capacitor Bays
Cable joints, capacitors, transformers
Surface cleaning and preparation (ST2/ST3 or SA2.5)
Mixing of 2-component system (Part A:B = 2:1)
Application of primer and topcoat
Recoating after 2 hours, 4-coat system
Final curing: 72 hours
Product Details
STARBLAZE 32I01 is a solvent-free, two-part self-levelling dielectric coating formulated to protect concrete and metallic surfaces in electrical and heavy industrial facilities. Developed for Class A insulation, it delivers a dielectric strength exceeding 30 kV and forms a seamless protective barrier with excellent adhesion.
Related Products
-
STARBLAZE 32F09 VEGF is a high-build, two-part epoxy coating enhanced with glass flakes to deliver outstanding performance against corrosion, erosion, and aggressive chemicals. Suitable for continuous immersion, it offers thermal resistance up to 150 °C when submerged and up to 280 °C in non-immersed service. This solvent-free system forms a dense, impermeable barrier over prepared metal surfaces. Its excellent abrasion resistance (<50 mg/1000 cycles) and strong adhesion (pull-off >1500 psi) make it ideal for tank interiors, ducting, exhaust manifolds, and other process equipment subjected to extreme temperatures and chemicals. The product also provides dielectric properties up to 16 kV BDV, adding safety in electrostatic applications. Available Packs: 5 Kg, 20 Kg Sets
-
STARBLAZE 33B01 is a high-strength, epoxy-based, self-levelling screed formulated to deliver superior load-bearing capacity and chemical resistance on concrete substrates. Blended as a three-component system, it cures to a dense, abrasion-resistant layer ideal for use under epoxy top coats or as a standalone heavy-duty flooring solution. Designed for high-impact and chemically aggressive environments, 33B01 achieves compressive strengths over 36 MPa, tensile strengths exceeding 10 MPa, and bond strength surpassing the cohesive strength of the concrete itself. Its self-levelling properties ensure uniform surfaces even over uneven or repaired substrates. Suitable for acid bunds, containment zones, production floors, and vehicle traffic areas, it provides reliable performance where hygiene, durability, and resistance to industrial chemicals are essential. Available Packs: Three pre-weighed packs (Base, Hardener, Aggregate)
-
STARBLAZE 75C01 is a non-toxic, water- and oil-tolerant concrete sealing agent designed to penetrate contaminated surfaces, sealing and protecting aged floors and walls from seepage and chemical ingress. Based on Moisture-Cure Urethane (MCU) Technology, it cures rapidly in humid conditions and bonds deeply with damp or oily concrete. Its catalysed, chemically reactive formulation ensures strong adhesion, structural reinforcement, and reliable surface preparation for follow-up coatings in demanding industrial environments. Available Packs: 1L, 4L, 20L